Monitored variables and members: piers tilt (incline; roll and pitch), water level of the river under the bridge, camera Bridge Structure: The two west/east-bound bridges over river consists 7 piers and 2 abutments. Continuous span girder
Solutions & Applications Archive
Monitoring Bridges Australia Concrete Bridges under extreme loads: Wireless Strain Monitoring
The transport of extreme loads or “superloads” (deemed anything greater than 200 tonnes) on large convoys is often necessary in Victoria, Australia. Considerable planning and assessment are undertaken by the state’s Department of Transport (colloquially known as
Resensys Installs Tilt and Water Level SenSpot Sensors on Trancas Creek Bridge in Malibu, CA
On November 14th and 15th, 2017, Resensys installed 6 SenSpot Wireless Inclinometers, SenSpot Water Level sensor and 2 SeniMax data loggers on Trancas Creek Bridge in Malibu, CA. Trancas Creek Bridge is a coastal, 100 foot bridge
Resensys wireless strain and tilt sensors on fracture critical US522 over Potomac River Bridge
Resensy’s wireless strain sensors (Strain SenSpot) and wireless tilt sensors (Tilt SenSpot) were used to monitor another fracture critical bridge in Maryland. The structural health monitoring based on Resensys SenSpot sensors system was deployed on bridge US522
Resensys Strain Monitoring System on SR-16 Clay County Culvert Florida
On November 21st 2016, a Resensys structural health monitoring system was deployed on SR-16 Clay County Culvert. The system consists of 4 high rate strain SenSpot sensors and one SeniMax data logger and remote communication gateways.
Resensys Wireless Bridge Monitoring for Fracture Critical Bridges at 2016 Northeast Bridge Preservation Partnership (NEBPP – 2016)
In September 2016, Resensys wireless technology for monitoring fracture critical bridges was presented at the Northeast Bridge Preservation Partnership (NEBPP). NEBPP is comprised of representatives from regional state and local highway agencies, provincial transport agencies, industry, suppliers, consultants, and academia. A
Resensys Wireless SenSpot Sensors for Fracture Critical Bridges
Resensys wireless technology featured in Bridge Design & Engineering magazine in August 2016. Resensys technology offers easy-to-install wireless devices for long-term monitoring of fracture-critical bridges. It can monitor strain and temperature on girders, truss members, gusset plates,
Resensys Adds More Strain SenSpots and Conducts Truck Test on Gold Star Memorial Bridge, Connecticut
In July 2016, AI Engineers was tasked by the Connecticut Department of Transportation (ConnDOT) to work with the Resensys team to add 8 more Wireless Strain SenSpot Sensors in addition to the 20 previously installed strain gauges. During this instillation
Resensys Receives New Project to wirelessly Monitor Strain on Connecticut’s Largest Structure
On the col morning of December 8th, 2015, Resensys team was brought to in New London, Connecticut along with a team of AI Engineers to deploy the Resensys Health Monitoring System on the Gold Star Memorial Bridge. Opened
Resensys High-Rate Strain SenSpot Sensors Deployed on Robert O Norris Bridge in White Stone, Virginia
On October 12th 2015, Resensys was tasked by the Virginia Department of Transportation to the Robert O Norris Bridge in White Stone, Virginia. Guiding traffic over Rappahannock River, the 50+ year old structure is nearly 10,000 feet