Few things are more frustrating to commuters than a lengthy traffic detour. Hours and miles are added to trips and patience erodes. To transportation officials, an unexpected bridge inspection report represents an immediate call to action. Safety
Asset Management – wouldn’t it be nice to have a real-time pulse on your most critical infrastructure assets?
August 23 2021Comments off
SenSpot™ for Monitoring Timber Bridges
January 31 2021Comments off
Wireless SenSpot™ can be used for monitoring Timber Bridge Structures: •Measuring strain/stress in timber by Wireless Strain Gauge SenSpot™ •Measuring vertical displacement and deformation under loads by Wireless Displacement SenSpot™ •Obtaining load rating for timber bridges by
Levee (Embankment Dam) Potential Damage Case Study: Wireless Health Monitoring System on the Levee
August 28 2020Comments off
Project Preview (Monitored variables and members) Monitoring potential damage within section of the cables (main channel) runs along the levee Monitoring potential tampering/breaking of anchors (holding steel ropes) which hold main channel cables The resistance is monitored
Monitoring Settlement of a Retrofitting Concrete Beam at a Building
July 8 2020Comments off
Project Preview A high rise building’s load bearing concrete beam, which is suspended over a top floor terrace, was slowly deflecting over time. A fix was created to hold the deflecting beam. The fix is steel beams
Resensys Installs Tilt and Water Level SenSpot Sensors on Trancas Creek Bridge in Malibu, CA
August 22 2018Comments off
On November 14th and 15th, 2017, Resensys installed 6 SenSpot Wireless Inclinometers, SenSpot Water Level sensor and 2 SeniMax data loggers on Trancas Creek Bridge in Malibu, CA. Trancas Creek Bridge is a coastal, 100 foot bridge
Resensys Strain Monitoring System on SR-16 Clay County Culvert Florida
December 13 2016Comments off
On November 21st 2016, a Resensys structural health monitoring system was deployed on SR-16 Clay County Culvert. The system consists of 4 high rate strain SenSpot sensors and one SeniMax data logger and remote communication gateways.
Resensys Adds More Strain SenSpots and Conducts Truck Test on Gold Star Memorial Bridge, Connecticut
August 9 2016Comments off
In July 2016, AI Engineers was tasked by the Connecticut Department of Transportation (ConnDOT) to work with the Resensys team to add 8 more Wireless Strain SenSpot Sensors in addition to the 20 previously installed strain gauges. During this instillation
Resensys Receives New Project to wirelessly Monitor Strain on Connecticut’s Largest Structure
June 23 2016Comments off
On the col morning of December 8th, 2015, Resensys team was brought to in New London, Connecticut along with a team of AI Engineers to deploy the Resensys Health Monitoring System on the Gold Star Memorial Bridge. Opened
Resensys High-Rate Strain SenSpot Sensors Deployed on Robert O Norris Bridge in White Stone, Virginia
June 23 2016Comments off
On October 12th 2015, Resensys was tasked by the Virginia Department of Transportation to the Robert O Norris Bridge in White Stone, Virginia. Guiding traffic over Rappahannock River, the 50+ year old structure is nearly 10,000 feet
Resensys continuous strain monitoring SenSpot sensors for load-rating of Route 12 bridge over Mill Brooke, Connecticut
June 22 2016Comments off
On the warm early fall morning of the 22nd of September, 2015, a team of AI Engineers were deployed along with the Resensys team by the Connecticut Department of Transportation to install multiple SenSpot high rate strain