Brief Description and the work performed by Resensys Case definition: Resensys monitoring systems have been deployed to monitor the structural health and scour conditions of multiple bridges and retaining walls in Colorado. Problems Identified: Solutions Implemented: Wireless

Brief Description and the work performed by Resensys Case definition: Scour is the leading bridge failure reason for concrete bridges and 58% of bridge failures in the US are due to hydraulic conditions (Source: FHWA). More than

Resensys Wireless Gauges play a vital role in overseeing NASA’s movable bridges in Cape Canaveral, Florida. This state-of-the-art system includes advanced wireless sensors such as the strain gauge SenSpot, accelerometer SenSpot, and tiltmeter SenSpot. Together, they form

On May 12, 2021 a crack found in the I-40 bridge connecting Arkansas and Tennessee.  This crack in a steel beam caused the bridge to be shut down immediately, resulting in traffic re-routing and massive efforts to

Project Preview A high rise building’s load bearing concrete beam, which is suspended over a top floor terrace, was slowly deflecting over time. A fix was created to hold the deflecting beam.  The fix is steel beams

Monitored Variables and Members: bearings rotation and strain in girders Bridge Structure:  the steel girder bridge over the river consists 14 piers and 2 abutments. The bridge longest span is about 160 feet, and it is fracture

Monitored variables and members: piers tilt (incline; roll and pitch), water level of the river under the bridge, camera Bridge Structure:  The two west/east-bound bridges over river consists 7 piers and 2 abutments.   Continuous span girder

On November 14th and 15th, 2017, Resensys installed 6 SenSpot Wireless Inclinometers, SenSpot Water Level sensor and 2 SeniMax data loggers on Trancas Creek Bridge in Malibu, CA. Trancas Creek Bridge is a coastal, 100 foot bridge

Resensy’s wireless strain sensors (Strain SenSpot) and wireless tilt sensors (Tilt SenSpot) were used to monitor another fracture critical bridge in Maryland. The structural health monitoring based on Resensys SenSpot sensors system was deployed on bridge US522

The system installed on Aug 27th 2015, consists of 8 tilt and 8 strain SenSpot sensors and one SeniMax data logger and remote communication gateway. The main purpose of the installation is to monitor operation of the