Check out the ARTBA 2021 Bridge Report Which shows that 220,000 US bridges need repair. The National Bridge Inspection Program (NBIS) sets inspection intervals for bridges according to certain criteria, and classifies bridge inspections into 5 types:
Solutions & Applications Archive
SenSpot™ for Monitoring Timber Bridges
Wireless SenSpot™ can be used for monitoring Timber Bridge Structures: •Measuring strain/stress in timber by Wireless Strain Gauge SenSpot™ •Measuring vertical displacement and deformation under loads by Wireless Displacement SenSpot™ •Obtaining load rating for timber bridges by
Resensys’ research featured in ISHMII (International Society of Structural Health Monitoring of Intelligent Infrastructure) Newsletter, The Monitor.
Structural Health Monitoring could have provided alarm in bridge failure Resensys was in good company in the Summer 2020 issue of the ISHMII Newsletter, The Monitor, as the collapse of the bridge on the Magra River at
Resensys included in head-turning group of industry leaders in The Insight Partners’ 2027 Structural Health Monitoring Market Outlook Report
Industry Leadership Resensys’ inclusion in a group of 9 key players in the Global Structural Health Monitoring (SHM) Industry in The Insight Partner’s most recent global market outlook report reflects Resensys’ continued world-class product and research/ application
Levee (Embankment Dam) Potential Damage Case Study: Wireless Health Monitoring System on the Levee
Project Preview (Monitored variables and members) Monitoring potential damage within section of the cables (main channel) runs along the levee Monitoring potential tampering/breaking of anchors (holding steel ropes) which hold main channel cables The resistance is monitored
Monitoring Settlement of a Retrofitting Concrete Beam at a Building
Project Preview A high rise building’s load bearing concrete beam, which is suspended over a top floor terrace, was slowly deflecting over time. A fix was created to hold the deflecting beam. The fix is steel beams
Steel Girder Bridge Case Study: Wireless Tilt (Bearing Rotation) and Wireless Strain Sensors on Steel Girder Bridge
Monitored Variables and Members: bearings rotation and strain in girders Bridge Structure: the steel girder bridge over the river consists 14 piers and 2 abutments. The bridge longest span is about 160 feet, and it is fracture
Scour Critical Bridge Case Study: Wireless Tilt, Wireless Water Level Sensors and Camera on Continuous Span Concrete Girder Bridge
Monitored variables and members: piers tilt (incline; roll and pitch), water level of the river under the bridge, camera Bridge Structure: The two west/east-bound bridges over river consists 7 piers and 2 abutments. Continuous span girder bridge
Monitoring Bridges Australia Concrete Bridges under extreme loads: Wireless Strain Monitoring
The transport of extreme loads or “superloads” (deemed anything greater than 200 tonnes) on large convoys is often necessary in Victoria, Australia. Considerable planning and assessment are undertaken by the state’s Department of Transport (colloquially known as
Resensys Installs Tilt and Water Level SenSpot Sensors on Trancas Creek Bridge in Malibu, CA
On November 14th and 15th, 2017, Resensys installed 6 SenSpot Wireless Inclinometers, SenSpot Water Level sensor and 2 SeniMax data loggers on Trancas Creek Bridge in Malibu, CA. Trancas Creek Bridge is a coastal, 100 foot bridge