Wireless Tilt Sensor Archive

Project Preview A high rise building’s load bearing concrete beam, which is suspended over a top floor terrace, was slowly deflecting over time. A fix was created to hold the deflecting beam.  The fix is steel beams

Monitored Variables and Members: bearings rotation and strain in girders Bridge Structure:  the steel girder bridge over the river consists 14 piers and 2 abutments. The bridge longest span is about 160 feet, and it is fracture

Monitored variables and members: piers tilt (incline; roll and pitch), water level of the river under the bridge, camera Bridge Structure:  The two west/east-bound bridges over river consists 7 piers and 2 abutments. Continuous span girder bridge

On November 14th and 15th, 2017, Resensys installed 6 SenSpot Wireless Inclinometers, SenSpot Water Level sensor and 2 SeniMax data loggers on Trancas Creek Bridge in Malibu, CA. Trancas Creek Bridge is a coastal, 100 foot bridge

Resensy’s wireless strain sensors (Strain SenSpot) and wireless tilt sensors (Tilt SenSpot) were used to monitor another fracture critical bridge in Maryland. The structural health monitoring based on Resensys SenSpot sensors system was deployed on bridge US522

The system installed on Aug 27th 2015, consists of 8 tilt and 8 strain SenSpot sensors and one SeniMax data logger and remote communication gateway. The main purpose of the installation is to monitor operation of the

These two bridges are being monitored for possible deflections of their round piers. Any inclination will be reported with an accuracy of 0.001 degrees.